More

    How to Fix DNS_PROBE_FINISHED_NXDOMAIN in Chrome (7 Options)

    For those of you working with WordPress on a regular basis, errors specific to the CMS such as the white screen of death or database connection errors are somewhat common occurrences. But another subset of errors you will probably stumble upon are those tied to your internet connection and DNS. A very common error that Google Chrome users get when trying to browse to a web page is DNS_PROBE_FINISHED_NXDOMAIN. This can be downright frustrating as suddenly you can’t browse to your website or perhaps even anywhere at all. 😫

    If you’re seeing this error while trying to get to your WordPress site, don’t worry, this is fairly easy to fix. Check out the recommendations below on how to get connected again. This can also work for other browsers, such as Firefox, Edge, etc.

    What is DNS_PROBE_FINISHED_NXDOMAIN?

    The reason for DNS_PROBE_FINISHED_NXDOMAIN is typically due to a misconfiguration or problem with your DNS. DNS is short for Domain Name System, which helps direct traffic on the internet by connecting domain names with actual web servers. Essentially, it takes a human-friendly request – a domain name like kinsta.com – and translates it into a computer-friendly server IP address – like 216.3.128.12.

    When a user enters a URL in their web browser, DNS gets to work to connect that URL to the IP address of the actual server. This is called DNS name resolution and involves a DNS recursor querying various nameservers to figure out the actual IP address of a server. If DNS fails to resolve the domain name or address then you might receive the DNS_PROBE_FINISHED_NXDOMAIN error. The NXDOMAIN part stand stands for Non-Existent Domain. Read more about DNS and how it works.

    There are a couple of different variations of this error depending upon the browser you’re running.

    Google Chrome

    In Google Chrome this error will show as DNS_PROBE_FINISHED_NXDOMAIN (as seen below) and will say that the DNS address could not be found.

    This site can’t be reached or This webpage is not available.

    DNS_PROBE_FINISHED_NXDOMAIN error in Chrome

    Mozilla Firefox

    In Mozilla Firefox it will simply show as Hmm. We’re having trouble finding that site (as seen below).

    We can’t connect to the server at domain.com.

    DNS_PROBE_FINISHED_NXDOMAIN error in Firefox

    DNS_PROBE_FINISHED_NXDOMAIN error in Firefox

    Microsoft Edge

    In Microsoft Edge, it will simply show as Hmmm… can’t reach this page (as seen below). Which isn’t very helpful.

    Make sure you’ve got the right web address: domain.com.

    DNS_PROBE_FINISHED_NXDOMAIN error in Edge

    DNS_PROBE_FINISHED_NXDOMAIN error in Edge

    Safari

    In Safari, it will simply show as Safari Can’t Find the Server (as seen below).

    Safari can’t open the page “domain.com” because Safari can’t find the server “domain.com”.

    DNS_PROBE_FINISHED_NXDOMAIN error in Safari

    DNS_PROBE_FINISHED_NXDOMAIN error in Safari

    How to Fix DNS_PROBE_FINISHED_NXDOMAIN

    Here are some recommendations and things to check to fix the error (sorted in order by most common reasons we see):

    1. Release and Renew IP Address
    2. Restart DNS Client Service
    3. Change DNS Servers
    4. Reset Chrome Flags
    5. Disable VPN and Antivirus Temporarily
    6. Check Your Local Hosts File
    7. Check DNS of Your Domain
    8. Restart Your Computer

    1. Release and Renew IP Address

    Due to the fact that this is usually a client-side DNS issue, the very first thing you should do is try releasing and renewing the IP address on your computer. This also includes flushing your local DNS cache, which is similar to browser cache.

    Windows

    In Windows simply open up Command Prompt by pressing the Windows logo key and R. Then type “cmd” and hit Enter.

    CMD

    CMD

    Type in ipconfig /release and hit Enter. This will release your current IP address.

    ipconfig /release

    ipconfig /release

    Then type in ipconfig /flushdns and hit Enter. This will flush your local DNS cache. You should see a “Successfully flushed the DNS resolver Cache” if it worked.

    ipconfig /flushdns

    ipconfig /flushdns

    Then type in ipconfig /renew and hit Enter. This will renew your IP address.

    ipconfig /renew

    ipconfig /renew

    You might also try resetting your IP settings and Winsock catalog with the following commands: netsh int ip set dns and netsh winsock reset.

    An alternative way to flush and renew your DNS is simply by disabling your network adapter and re-enabling it.

    Mac

    To release and renew your IP address on a Mac, go to System Preferences…

    Mac system preferences

    Mac system preferences

    Click on the network icon and then click “Advanced.”

    Mac network advanced

    Mac network advanced

    Click the TCP/IP tab heading if you aren’t already in there. Then click on the “Renew DHCP” lease button.

    Just like we did above in Windows, Mac users can also clear their local DNS cache. Although this is done in a different place. Go to Utilities and then click on “Terminal.”

    Mac terminal

    Mac terminal

    Enter in the following command:

    dscacheutil -flushcache
    Flush DNS cache on Mac

    Flush DNS cache on Mac

    Note: There is no success message on Macs.

     

    2. Restart DNS Client Service

    If you’re running Windows you can try restarting the DNS client services which resolves and caches DNS domain names.

    Simply open up Command Prompt by pressing the Windows logo key and R. Then type “services.msc” and hit Enter.

    services.msc

    services.msc

    Scroll down to “DNS Client,” right click on it, and select “Restart.”

    Restart DNS client service in Windows

    Restart DNS client service in Windows

    If the restart option is greyed out for you (as it was for us), an alternative way to do it is via the command prompt.

    Open up Command Prompt by pressing the Windows logo key and R. Then type “cmd” and hit Enter.

    CMD

    CMD

    Then enter the following commands:

    net stop dnscache
    net start dnscache

    Depending on the version of Windows you’re running you might get an error saying:

    The requested pause, continue, or stop is not valid for this service.

    This is most likely because you need to run CMD as a network service to issue the command. If you’re running into this error, we suggest trying the other alternatives below first.

    3. Change DNS Servers

    The next thing you can try is changing your DNS servers. By default, DNS servers are automatically assigned by your ISP. But you could try temporarily changing these to a public DNS server, such as Google or Cloudflare.

    • Some prefer to use Google’s public DNS (8.8.8.8 and 8.8.4.4) long-term due to them sometimes being more reliable.
    • Cloudflare also just launched their new secure and blazing fast free DNS (1.1.1.1 and 1.0.0.1) which we will be using in this example. If you want to use Google’s the steps are the same, you simply replace the DNS server addresses with Googles.

    Tip: If you’re already using a free DNS server and having issues, removing it and defaulting back to your ISP’s DNS servers also sometimes fix things. Google and Cloudflare aren’t perfect 100% of the time and there have been a few instances where we’ve noticed switching back has resolved the issue.

    Windows

    In Windows simply open up Command Prompt by pressing the Windows logo key and R. Then type “control panel” and hit Enter.

    Run Control Panel Windows

    Run Control Panel Windows

    Click on “Network and Internet” and then “Network and Sharing Center.” On the left-hand side, click on “Change Adapter Settings.”

    Change adapter settings

    Change adapter settings

    Right click on your current connection, this will either be Local Area Connection or Wireless Network Connection based on how you’re connecting. Then click on “Properties.”

    Wireless connection properties

    Wireless connection properties

    Select Internet Protocol Version 4 (or Version 6 if desired) and click on “Properties.”

    IPV 4 properties

    IPV 4 properties

    Make a note of any existing settings in case you need to revert back. Click “Use the following DNS server addresses.” Enter the following, or replace the existing with these:

    For IPv4: 1.1.1.1 and 1.0.0.1
    For IPv6: 2606:4700:4700::1111 and 2606:4700:4700::1001

    DNS server addresses

    DNS server addresses

    Click OK, then Close. Restart your browser.

    Mac

    To change DNS servers on a Mac, go to System Preferences…

    Mac system preferences

    Mac system preferences

    Click on the network icon and then click “Advanced.”

    Mac network advanced

    Mac network advanced

    Click on the “DNS” tab.

    Mac DNS

    Mac DNS

    Then add Cloudflare’s DNS server addresses.

    For IPv4: 1.1.1.1 and 1.0.0.1
    For IPv6: 2606:4700:4700::1111 and 2606:4700:4700::1001

    4. Reset Chrome Flags

    Sometimes Chrome settings or experimental features can get accidentally changed or messed up. You reset these back to default by entering chrome://flags into your browser and clicking on “Reset all to default.”

    Reset Chrome flags

    Reset Chrome flags

    The restart your browser.

    5. Disable VPN and Antivirus Temporarily

    Sometimes VPNs and Antivirus software can conflict or override your network settings, including your DNS servers, etc. If you have any running, try temporarily disabling them (closing them) to see if it resolves the DNS probe finished nxdomain error in Chrome.

     

    6. Check Your Local Hosts File

    Every computer has what they call a local hosts file. This is a file that contains manual DNS entries which are mapped to specific IP addresses. Typically this is only edited when you want to preview your DNS before switching over domains to a new host. However, there is a multitude of different ways this file could have been changed or edited. Therefore, if none of the above options worked for you, it’s worth double checking your local hosts file to ensure the website you’re trying to access isn’t in there.

    Windows

    The hosts file typically requires additional access. So the first step is to open up your text editor as an administrator. Simply click on your start menu, search for your text editor, right-click on it and select “Run as administrator.” This can be done in any text editor such as Notepad, Notepad++, Atom, etc. We are using Sublime in our example below.

    Run text editor as administrator

    Run text editor as administrator

    Within your text editor click File → Open and browse to the following location:

    C:\Windows\System32\drivers\etc\

    Click on the hosts file and “Open.”

    open hosts file

    Open hosts file

    Double-check and make sure the website you’re trying to visit isn’t listed in there. If it is, remove it.

    Mac

    To check your host’s file on a Mac, we recommend getting Gas Mask. It’s a free application that can be used as host file manager, host files editor, and switch between them. It makes everything quick and easy! Otherwise, you can follow the steps below to edit your host’s file on Mac manually.

    Go to Utilities and then click on “Terminal.”

    Mac terminal

    Mac terminal

    Enter in the following command and press Enter (you will most likely be prompted for your administrator password as well).

    sudo nano /private/etc/hosts
    Hosts file Mac

    Hosts file Mac

    Double-check and make sure the website you’re trying to visit isn’t listed in your host’s file. If it is, remove it.

    7. Check DNS of Your Domain

    If you’re only getting the DNS_PROBE_FINISHED_NXDOMAIN error on a single domain, even after checking your host’s file, you might need to check the DNS settings on the domain name itself. If you’re a Kinsta client we have an in-depth post on how to point your domain and or DNS to Kinsta. If you recently migrated your website to a new hosting provider, it could be the DNS was cached incorrectly on your computer. In which case, Step 2 above should have resolved that.

    8. Restart Your Computer

    We know it’s annoying, but it has to be mentioned. 😬 If none of the above options work, trying restarting your computer and even your router. We realize many of you probably have hundreds of tabs or applications open and that’s why we made this the last option. But rebooting devices actually clears out a lot of temporary caches.

    Summary

    Even though it’s frustrating, the DNS_PROBE_FINISHED_NXDOMAIN error is usually pretty easy to get resolved. Between flushing your DNS cache, renewing your IP, and trying different DNS servers, you should hopefully be back up and surfing the web in no time.  If we missed anything, feel free to let us know below in the feedback section.


    If you enjoyed this tutorial, then you’ll love our support. All Kinsta’s hosting plans include 24/7 support from our veteran WordPress developers and engineers. Chat with the same team that backs our Fortune 500 clients.

    Recent Articles

    Related Stories

    Stay on op - Ge the daily news in your inbox